Forums:
Anybody know what's going on? I did the bottom hotcoat and noticed it bled quite a bit (so did the cutlaps) but I figured I just didn't stick the tape on well. I went to do the top hotcoat and found that the tape wasn't sticking to the epoxy very well at all no matter how hard I pressed it on. Some places worse than others. I got the cheapest blue 1" 3m masking tape at Lowe's. Would the green one stick better. Kinda bummed because I wanted to finish it today but all the stores are closed so I can't go out and buy tape. I'm using the slow epoxy from my local fiberglass Hawaii. Thanks for any help!