Hey guys,
We still cant glass yet here because its freezing. To occupy my time I looked at the first board I made and unfortunately it was atrocious and I needed to have the experience of the other board we made at the same time to realize what proper rails actually look like.
This is the shorter thinner and reshaped version of the first monstrosity. I tried to unlock it from the other board.
I just want some guidance on the rail bands I currently have. I am shooting for something a bit boxy so I went 2 and 4 inches at the Back and Middle and then 3 and 1.5 12 inches from nose.
My main question is
1) How tight do you make your bands for the nose. Should I just dowel each line straight into the nose?
2) For the tail I was planning on marking 2 and 4 on the tail block and then connecting. Is this the right way to do it
Take a look and let me know your thoughts.
Thanks,
Adam
