Forums:
My initial thought was to place the extra foam in the chest/ hips area for paddle power, but after reading this in the archives it made me think of it in a whole different way.
"If you measure "hull" depth as the rail apex to the stringer (lay a level 90 degrees to the stringer and measure the distance from the level bottom to the rail apex), my deepest "hull" is usually just in front of the hump and roughly coincides with the first rocker break."
So where the front of the hump starts ,towards the nose, should roughly be where the wide-point (hull depth) and the rocker begins on the bottom of the board?
